> govt jobs Archives - SYLLABUS DEKHO

IB ACIO syllabus 2021| Intelligence bureau syllabus pdf 2021

IB ACIO syllabus

The Ministry of Home Affairs organizes the Intelligence Bureau Assistant Central Intelligence Officers Examination for recruiting 2000 executives at IB (Intelligence Bureau). The selection process for IB ACIO Executive 2021 Recruitment will involve:

  1. Tier-1 objective-based paper: Online Exam
  2. Tier-2 Descriptive Exam (English)
  3. Tier-3 Interview

IB ACIO Syllabus and Exam Pattern 2021

Organization Name Ministry of Home Affairs, Intellectual Bureau
Post Name Assistant Central Intelligence Officer
No of Vacancies 2000
Category Name Syllabus
Exam Stage Tier 1, Tier 2 and interview
Nature of exam Tier 1: Objective type

Tier 2: Descriptive type

Mode of exam Online and offline
Total Marks Tier 1: 50

Tier 2: 50

Interview: 100

Duration of exam Tier 1: 60 Mins

Tier 2: 60 Mins

Application Process 19th December 2020- 09th January 2021
IB ACIO Exam Date February 18, 19, and 20, 2021
Official website www.mha.gov.in

It is significant to have an idea about the IB ACIO syllabus 2021 and exam pattern.

  • There are three phases of the exam, Tier I, II, and III, the first two phases being the writing phases followed by the personal interview in the final round.
  • Tier I is an objective-based paper whereas Tier II is descriptive.
  • The sections of Tier I include General Studies, General Awareness, Reasoning, Quantitative Aptitude, and English Language.
  • There is a negative marking of 0.25% for every incorrect answer in Tier I.
  • To pass the Tier 2 exam, candidates are required to score at least 33% marks

IB ACIO 2021 Tier-1 Exam Pattern

IB ACIO 2021 Tier-1 Exam will be an online competitive examination consisting of 100 Objective type MCQs, divided into 5 parts containing 20 questions of 1 mark each. The candidate has to appear in Tier-I at one of the 3 centres allotted to him/her out of his choice of three cities.

IB ACIO 2021 Tier-1 Online Exam
Section No. of Ques Marks Duration
General Awareness 20  20 1 Hour
Quantitative Aptitude 20  20
Numerical/Analytical/Logical Ability & Reasoning 20  20
English Language 20  20
General Studies 20  20
TOTAL  100  100

In order to achieve qualitative selection & recruit the best available talent, there would be cut-off marks (out of 100) in Tier-I exam as under:

Category Minimum Qualifying Marks
UR 35
OBC/EWS 34
SC/ST 33

On the basis of their performance & normalization of marks in Tier-I exam, candidates would be shortlisted for Tier-II exam at 10 times the number of vacancies, subject to the candidate scoring the minimum cut-off.

Check Out>> RSMSSB Syllabus 2021 | RSMSSB Syllabus Pdf download

IB ACIO General Awareness & General Studies Syllabus

History Physics
Biology Current Affairs
Science & Technology Static GK
Indian Polity & Constitution Economy & Finance
Geography Chemistry

IB ACIO Quantitative Aptitude Syllabus

Number systems Percentages Age
Mensuration Ration and Time Missing Numbers
Averages Profit and loss Prices and Expenditure Problems
Fundamental Arithmetical Operations Computation of whole numbers Time and Work
Use of tables and graphs Decimals Volume
Relationship between numbers Operations Research & Linear Programming Fractions
Differential Geometry Dynamics Profit and Loss
Essential Mathematics Calculus Average
Real Analysis Fundamental Arithmetical Operations Simple and Compound Interest
Computation of Whole numbers Time and Distance Mensuration
Ration and Proportion Interest Time and Distance
Discount Algebra Series Completion
Differential Equations Statistics Ratios
Time and Work Fractions Factoring
Analytical Geometry Percentage LCM and HCF

Alphanumeric series Directions Reasoning Analogies
Artificial Language Odd One Out Blood Relations
Calendars Order & Ranking Cause and Effect
Clocks Statement and Conclusions Coding
Data Sufficiency Statement and Assumptions Decision Making
Puzzles Input-Output Decoding

IB ACIO English Language Syllabus

Spellings Correction One Word Substitution Clauses
Improvement Verbal Comprehension Passage Spot the error
Verbs and Adjectives Detecting Mis-spelt words Vocabulary
Idioms and Phrases Passage Sentence Structure
Fill in the blanks Grammar Synonyms/Antonyms

IB ACIO Logical/Analytical/Numerical Ability & Reasoning Syllabus

IB ACIO Tier-2 Exam Pattern

The tier-2 exam is descriptive in nature and carries 2 questions for 50 marks in total.

Section Marks Time
Essay Writing 30 60 Minutes
English Comprehension & Précis Writing 20
Total 50

Most Probable Topics for Essay:

  • Security Threats of India
  • Cultural Diversity of the Country
  • Emergency Trends
  • Miscellaneous

 

English Comprehension & Precise Writing: In this section, the candidate’s English Comprehension will be tested.

The Tier III Phase of the exam is the personal interview round. Here, candidates are judged based on their presentation, intelligence, and personality.

This was all about the IB ACIO Grade II syllabus and Exam Pattern. This will help you to prepare according to the syllabus. All the very best for preparation.

IB ACIO Interview 2020-21

The candidates qualifying Tier I and Tier II will be called for Interview round. The interview will be conducted for 100 marks and the final selection list will be based on the consolidated marks in Tier I, Tier II and Interview.

Check Out>> TN TRB Syllabus 2021 | TN Trb syllabus pdf download

RSMSSB Syllabus 2021 | Rajasthan Patwari Syllabus Pdf download

Rajasthan Subordinate & Ministerial Services Selection Board

Aspirants preparing for Rajasthan Subordinate and Ministerial Services Selection Board (RSMSSB) recruitment drive 2021 must be aware of the RSMSSB Syllabus. Candidates who are going to participate in the RSMSSB recruitment process and will have to go undergo:

  1. Written examination
  2. skill test/interview process

RSMSSB Syllabus 2021: Highlights of Rajasthan Patwari Recruitment

Having a better understanding is a must for preparation and it helps aspirants in various ways. The candidates preparing for the exam should give the final touch to their exam preparation by completing the RSMSSB syllabus 2021 given on this page.

In this article, we will discuss the complete RSMSSB 2021 syllabus and help you to know about important sections and topics for your exam preparation.

Department Name Subordinate Ministerial Services Selection Board
Name of the Board Rajasthan Subordinate and Ministerial Service Selection Board (RSMSSB)
State Rajasthan
Recruitment Patwari Bharti 2021
Designation Patwari
Vacancies Yet to announce
Apply Mode Online
Registration schedule Yet to announce
Online Application Date 6th August 2021
Last Date to Apply Online 4th September 2021
Exam Date October 2021
Category Syllabus
Official Site http://rsmssbold.rajasthan.gov.in/
Require Qualification Graduate Passed with RS-CIT
Age Limit 18 to 40 years
Selection Basis Written Exam
Types of Questions Multiple choice Questions (MCQs)
Negative Marking Yes, 1/3 marks shall be deducted for each wrong answer
No of Vacancies 195

 

RSMSSB Syllabus 2021: Syllabus

The syllabus consists of 5 sections.

The syllabus consists of 5 sections. The detailed syllabus for each section is mentioned below:

General Knowledge

Culture, Geography, History and Rajasthan politics

mental ability and reasoning, Basic Numerical efficiency

Computer Awareness

General Hindi and English

1. RSMSSB Syllabus 2021 for General Knowledge

The questions in this Rajasthan Patwari syllabus section will be designed to test the knowledge of the candidate about activities of his/her surrounding environment which includes:

  • Constitution of India,
  • Current events,
  • Everyday science,
  • General politics,
  • Geography and culture of Rajasthan,
  • History,
  • Principles of Computer.
  • Sports

2. RSMSSB Syllabus 2021 for Culture, Geography, History and Rajasthan politics

  • Arts and Culture
  • Famous tourist sites
  • Festivals, classical music and Fun Fairs
  • Independence Movement
  • Rajasthan Administration
  • Rajasthan’s Culture
  • Rajasthan’s History

3. RSMSSB Syllabus 2021 for mental ability and reasoning, Basic Numerical efficiency

  • Alphabet test.
  • Area and volume.
  • Blood relations,
  • Coding-decoding
  • Direction sense test.
  • Figure matrix questions. Classification.
  • Input-output.
  • Inserting the missing character number.
  • Logical arrangement of words.
  • Making judgments.
  • Making series analogy
  • Mathematical operations, average, ratio.
  • Number Ranking and Square.
  • Passage and conclusions
  • Percent
  • Profit & Loss.
  • Simple and compound interest.
  • Sitting arrangement.
  • Unitary Method

4. RSMSSB Syllabus 2021 for Computer Awareness

  • Characteristics of Computers.
  • Operating System, MS-Office (exposure of Word, Excel/spreadsheet, PowerPoint).
  • Information Technology and Society – Indian IT Act Digital Signatures Application of Information Technology in Govt. for e-Governance. Mobile/Smart phones, Information kiosks.

5. RSMSSB Syllabus 2021 for General Hindi and English

The questions in this section will be designed for testing the understanding and knowledge of the candidate in Hindi and English languages. Questions will be asked from

  • Antonyms
  • Dictionary
  • Fill in the blanks
  • Grammar
  • Idioms and idiomatic application of words.
  • Sentence making
  • Spelling
  • Spot the errors
  • Synonyms

Check Out>> TN TRB Syllabus 2021 | TN Trb syllabus pdf download

SSC GD SYLLABUS 2021 | Pdf Download

SSC-GD

The SSC GD exam is the General Duty Constable examination conducted annually by the Staff Selection Commission for the recruitment of eligible personnel in various Government departments and Ministries of the country. The post of Constable (General Duty) in Border Security Force (BSF), Central Industrial Security Force (CISF), Central Reserve Police Force (CRPF), Indo Tibetan Border Police (ITBP), Sash Astra Seema Bal (SSB), National Investigation Agency (NIA) & Secretariat Security Force (SSF) and Rifleman (General Duty) Posts in Assam Rifles are filled through this exam.

Aspirants can download the SSC GD Syllabus PDF from the official website of the government or can refer our webpage for the information.

Here is an overview of the SSC GD Constable exam 2020:

The whole recruitment process will be completed in Three stages including:

Phase 1- Computer-Based Examination (CBE)

Phase 2- Physical Efficiency Test (PET)

Phase 3- Physical Standard Test (PST)

Phase 4- Detailed Medical Examination (DME)

Organization Staff Selection Commission
Name of the Exam SSC GD Constable Exam 2020
Name of the Posts Constable GD
Exam Mode Online
Apply Mode Online
Total Questions 100

Those applicants who qualify written examination will be eligible for the medical test and those candidates who qualify the medical tests will be appointed as GD Constable Posts.

Phase 1/ Tier 1 of the SSC GD Constable Exam

It consists of 4 subjects which are:

  1. General Intelligence and Reasoning
  2. Elementary Mathematics
  3. General Knowledge and General Awareness
  4. English/ Hindi.

Here are some important points needed to keep in mind while preparing for the exam:

  • Phase 1/ Tier 1 consists of 100 questions from 4 different subjects
  • All questions are objective type with 4 different options
  • Candidates will get 1 mark for each correct answer and – 0.25 marks for each wrong answer
  • Candidates will get 90 minutes for the complete test
  • The questions and options will be given in both English and Hindi Language
  • Each section has 25 questions. Every question is for 1 mark.
  • SSC has pre-fixed the minimum cut off marks for the computer-based examination.

General/Ex-Servicemen: 35%

OBC/ SC/ ST: 33%

Also Check >> SSC JE Syllabus 2021

SSC GD Syllabus 2021: Topic-wise Weightage for CBD

As per the previous year paper analysis of the SSC GD Constable exam, we have provided the topic-wise number of expected questions:

Topics Number of Questions
1. General Knowledge and General Awareness
Current Affairs 8 to 10
Static GK 13 to 15
2. English/ Hindi
Error Spotting 3 to 5
Fill in the blanks 2 to 3
Cloze Test 5 to 6
Synonym and Antonym 3 to 4
Phrase and Idioms 3 to 4
One word Substitution 3 to 4
Reading Comprehension 5
Spellings 2 to 3
3. General Intelligence and Reasoning
Analogy 2 to 3
Coding-Decoding 2 to 3
Classification 1 to 2
Series 1 to 2
Order Ranking 2 to 3
Direction & Distances 1 to 2
Clock and Calendar 0 to 1
Alphabet or Word Test 2 to 3
Venn Diagram 2 to 3
Puzzle 2 to 3
Blood Relation 1 to 2
Syllogism 1 to 2
4. Elementary Mathematics
Mixture Problem 1 to 2
Ration and Proportion 2 to 3
Simplification 3 to 4
Algebra 1 to 2
Profit and Loss 1 to 2
Percentage 1 to 2
Average 0 to 1
Speed, Time and Distance 0 to 1
Mensuration 1 to 2
Simple Interest and Compound Interest 2 to 3
Data Interpretation 3 to 4

SSC GD Constable Physical Efficiency Test- TIER 2

The candidates who clear the PST will be called for the Physical Efficiency Test (PET). This examines the endurance and fitness level of the male and female candidates through a race.

The details of the SSC GD PET are as follows.

  • Pregnant women are disqualified from taking the SSC GD PET.
  • Ex-servicemen are exempted from taking the PET.
  • However, the Ex-servicemen have to appear for the Detailed Medical Examination (DME).

Race:

  1. Male – 5 Kms in 24 minutes
  2. Female – 1.6 Kms in 8 ½ minutes

For candidates of Ladakh Region:

  1. Male – 1 Mile in 6 ½ minutes
  2. Female – 800 metres in 4 minutes

 

SSC GD Constable Physical Standards Test- TIER 3

The candidates who are looking forward to the SSC GD Constable recruitment have to make sure that they meet the required measurements for the Physical Standards Test.

The Physical Standards Test will be the first stage of the selection process. Check the details below.

Physical Standards Test
Item Gender Measurement
Height Male 170 cm
Female 157 cm
Chest Male Expanded 80 cm

Minimum Expansion of 5 cm

Weight Male & Female Proportionate as per the height and medical standard for the candidates.

Detailed Medical Examination (DME)- TIER 4

Candidates who qualify the PET/ PST are shortlisted for the DME. The candidates who fail the medical test will not be considered eligible for the post. The selected candidates are medically examined by the Medical Boards constituted by the CAPFs to assess their physical and medical fitness on the basis of the following points:

  • Eyesight
  • Medical Fitness

The criteria set by the SSC authority for vision test is given in the table below:

The candidates must be having complete and thorough knowledge by now about the SSC GD Syllabus 2021 and Exam Pattern. Candidates should make sure to prepare themselves according to the syllabus and exam pattern to stand out.

SSC JE Syllabus 2021 | SSC JE Syllabus Pdf

SSC JE Syllabus

The Staff Selection Commission (SSC) is the administering body of the SSC JE Exam for recruiting fresh new engineering graduates for the posts of SSC Junior Engineer (Civil, Electrical, Mechanical, and Quantity Surveying & Contracts).

SSC JE Syllabus

The standard of the questions in Engineering subjects will be approximately of the level of Diploma in Engineering (Civil/Electrical/Mechanical) from a recognized Institute, Board or University recognized by All India Board of Technical Education. Aspirants can download the SSC JE syllabus pdf from the official website of the government.

The SSC JE Paper-I and Paper-II detailed syllabus are given below:

SSC Junior Engineer (Civil, Electrical, Mechanical and Quantity Surveying & Contracts)
Paper Type of Exam Type of Exam Type of Questions Date of exam Duration of exam Maximum Marks
Paper-1 Computer-based Test Online Objective type (MCQs) March 22nd, 2021 to March 25th, 2021 2 hours 200 marks
Paper-2 Descriptive Test Offline (Pen-paper) Written Examination To be notified 2 hours 300 marks
NEGATIVE MARKING:

  • As per the new SSC Junior Engineer Exam Pattern, there will be 0.25% negative marking for every incorrect answer in Paper I.
  • For instance, if the maximum marks allotted for a question is 1, then answering it incorrectly would incur a penalty of 1/4th marks.
  • There will be no negative marking for leaving a question blank.

SSC JE Syllabus

The SSC JE Syllabus for 2021 consists of two stages:

Paper I comprise of Objective-type questions and Paper II is of Descriptive type/Written Test.

SSC JE Syllabus for Paper I

This Paper is an objective/computer-based test of 200 marks for a duration of 2 hours (120 minutes). Given below are the different sections of SSC JE Paper I:

Sections No. of Questions Max Marks
General Intelligence & Reasoning 50 50
General Awareness 50 50
Part A- General Engineering (Civil & Structural) Or
Part B- General Engineering (Electrical) Or
Part C- General Engineering (Mechanical)
100 100
Total 200 200

General Intelligence and Reasoning for SSC JE Syllabus 2021

This section mainly consists of questions of both verbal and non-verbal type. This test particularly includes questions that are designed to test the candidate’s capacity to deal with arithmetical computations, abstract ideas, symbols, and their relationships and other analytical functions. Following are the topics from which questions are asked in the exam:

  • Analogies
  • Decision Making
  • Coding and Decoding
  • Relationship concepts
  • Arithmetical reasoning
  • Figural classification
  • Judgment
  • Arithmetic Number Series
  • Numerical Operations
  • Emotional Intelligence
  • Critical thinking
  • Social Intelligence
  • Date & city matching Classification of centre codes/roll numbers
  • Decoding and classification
  • Folding and Completion
  • Indexing Address Matching
  • Symbolic/Number Analogy
  • Venn Diagrams
  • Word Building
  • Blood Relations
  • Assumptions
  • Conclusions
  • Syllogism
  • Drawing inferences
  • Punched hole/pattern
  • Visual memory
  • Cause, Effect
  • Matrix
  • Direction Sense
  • Counting of Numbers

General Awareness for SSC JE Syllabus 2021

The questions in this section mainly test the candidate’s general awareness, knowledge of current affairs, everyday observations, and its various applications to society.

The questions in this section will be such that candidates do not require a special study of any particular discipline.

  • Economic Science
  • General Polity and Scientific Research
  • Current Affairs
  • India and its Neighbouring Countries
  • History (Ancient history and Modern History
  • Geography
  • Science and Technology
  • Recent Awards
  • Important Days
  • Constitution of India
  • States of India
  • Sports
  • Invention and Discoveries
  • Countries, Capitals, and Currencies
  • Art and Culture
  • Literature

Section 3: General Engineering

Candidates have to choose any one from these three parts given below based on their branch:

Part-A (Civil Engineering & Structural Engineering):

The SSC JE Civil Syllabus includes the following topics:

I ) Building Materials

  1. ii) Estimating, Costing and Valuation

iii) Soil Mechanics

  1. iv) Irrigation Engineering
  2. v) 1st and 2nd Law of Thermodynamics
  3. vi) IC Engine Performance

vii) IC Engine Cooling and Lubrication

viii) Ranking Cycle of System

  1. ix) Fitting & Accessories
  2. x) Air Compressors & their Cycles
  3. xi) Refrigeration Cycles

xii) The Principle of the Refrigeration Plant

xiii) Nozzles & Steam Turbines

xiv) Properties & Classifications of Fluids

  1. xv) Fluid Statics, Measurement of Fluid Pressure

xvi) Transportation Engineering

xvii) Environment Engineering

Part-B (Electrical Engineering): The SSC JE Electrical Syllabus includes the following topics:

  1. i) Basic concepts
  2. ii) Circuit law

iii) AC Fundamentals

  1. iv) Magnetic Circuit
  2. v) Electrical Machines
  3. vi) Measurement and Measuring instruments

vii) Synchronous Machines

viii) Fractional Kilowatt Motors and single-phase induction Motors

  1. ix) Generation
  2. x) Basic Electronics
  3. xi) Estimation and Costing

xii) Transmission and Distribution

xiii) Utilization and Electrical Energy

Part-C (Mechanical Engineering):

The SSC JE Mechanical Syllabus includes the following topics:

  1. i) Theory of Machines and Machine Design
  2. ii) 1st Law of Thermodynamics

iii) 2nd Law of Thermodynamics

  1. iv) IC Engine Performance
  2. v) Air standard Cycles for IC Engines
  3. vi) IC Engines Combustion

vii) Boilers

viii) IC Engine Cooling & Lubrication

  1. ix) Classification
  2. x) Rankine cycle of System
  3. xi) Specification

xii) Engineering Mechanics and Strength of Materials

xiii) Properties of Pure Substances

xiv) Air Compressors & their cycles

  1. xv) Fitting & Accessories

xvi) Principle of Refrigeration Plant

xvii) Nozzles & Steam Turbines

xviii) Fluid Statics

xix) Measurement of Flow rate

  1. xx) Refrigeration cycles

xxi) Properties & Classification of Fluids

xxii) Measurement of Fluid Pressure

xxiii) Fluid kinematics

xxiv) Dynamics of Ideal fluids

xxv) Hydraulic Turbines

xxvi) Basic Principles & Classification of steel

xxvii) Centrifugal Pumps

SSC JE Syllabus for Paper II

This paper consists of three parts as mentioned above. The Paper-II is a written test of 300 marks for a duration of 2 hours on any of the following parts chosen by the respective candidate:

  • Part-A (Civil Engineering & Structural Engineering)
  • Part-B (Electrical Engineering)
  • Part-C (Mechanical Engineering)

Candidates need to select any one of the parts which they wish to take during the exam. Basically, Paper-II of the SSC JE syllabus includes a detailed explanation of each of the topics under each part as discussed in the General Engineering section of Paper I.

SSC JE Syllabus for Paper 2: Civil Engineering

Building Materials

  1. i) Physical and chemical properties
  2. ii) Classification, Standard Tests, Uses and Manufacture/Quarrying of Materials

Estimating, Costing and Valuation

  1. i) Estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, and Plastering.
  2. ii) Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezoidal formula, Simpson’s rule.

iii) Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps.

  1. iv) Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of Valuation.

Surveying

  1. i) Principles of surveying, measurement of distance, chain surveying.
  2. ii) Working of the prismatic compass, compass traversing, bearings, local attraction, plane table surveying.

iii) Theodolite traversing, adjustment of theodolite, Leveling, Definition of terms used in levelling, contouring, curvature and refraction corrections.

  1. iv) Temporary and permanent adjustments of dumpy level, methods of contouring.
  2. v) Uses of contour map, tachometric survey, curve setting
  3. vi) Earthwork calculation, advanced surveying equipment.

Soil Mechanics

Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses.

  1. ii) Index properties of soils, Atterberg’s limits, ISI soil classification and plasticity chart.

iii) Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quicksand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement.

  1. iv) Shear strength of soils, direct shear test, Vane shear test, Triaxial test.
  2. v) Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test.

Hydraulics

  1. i) Fluid properties and hydrostatics, measurements of flow.
  2. ii) Bernoulli’s theorem and its application.

iii) Flow through pipes.

  1. iv) Flow in open channels, weirs, flumes, spillways, pumps and turbines.

Irrigation Engineering

  1. i) Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation.
  2. ii) Hydrology – Measurement of rainfall, runoff coefficient, rain gauge.

iii) Losses from precipitation – evaporation, infiltration, etc. Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies.

  1. iv) Different type of canals, types of canal irrigation, loss of water in canals. Canal lining – types and advantages. Shallow and deep to wells, yield from a well.
  2. v) Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy’s theory of critical velocity.
  3. vi) Lacey’s theory of uniform flow.

vii) Definition of flood, causes and effects, methods of flood control, water logging, preventive measure.

Transportation Engineering

  1. i) Highway Engineering – cross-sectional elements, geometric design, types of pavements, pavement materials
  2. ii) Components of permanent way -Sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards.

iii) Aggregates and bitumen, different tests, Design of flexible and rigid pavements.

  1. iv) Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering

Environmental Engineering

  1. i) Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments.
  2. ii) Surface water drainage.

iii) Solid waste management – types, effects, engineered management system.

  1. iv) Air pollution – pollutants, causes, effects, control.
    Noise pollution – cause, health effects, control.

SSC JE 2021 Syllabus For Paper 2: Structural Engineering

Theory of Structures

  1. i) Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and overhanging beams.
  2. ii) Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections.

iii) Chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section.

Concrete Technology

  1. i) Properties, Advantages and uses of concrete, cement aggregates, the importance of water quality, water-cement ratio
  2. ii) Workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete.

iii) Quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures.

RCC Design

  1. i) RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams.
  2. ii) T-beams, lintels.

iii) One-way and two-way slabs, isolated footings. Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods).

Steel Design

  1. i) Steel design and construction of steel columns
  2. ii) Beams roof trusses plate girders.

SSC JE 2021 Syllabus for Paper 2: Electrical Engineering

Basic Concepts

  1. i) Concepts of resistance, inductance, capacitance, and various factors affecting them.
  2. ii) Concepts of current, voltage, power, energy and their units.

iii) Circuit law – Kirchhoff‟s law, Simple Circuit solution using network theorems.

  1. iv) Magnetic Circuit – Concepts of flux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc.
  2. v) Electromagnetic induction, self and mutual induction.

AC Fundamentals

  1. i) Instantaneous, peak, R.M.S. and average values of alternating waves.
  2. ii) Representation of sinusoidal waveform, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit.

iii) Poly Phase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit.

Measurement and Measuring Instruments

  1. i) Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement.
  2. ii) Measurement of frequency and phase angle.

iii) Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges.

  1. iv) Use of CRO, Signal Generator, CT, PT and their uses.
  2. v) Earth Fault detection.

Electrical Machines

  1. i) D.C. Machine – Construction, Basic Principles of D.C. motors and generators, their characteristics, speed control and starting of D.C. Motors. Method of braking motor, Losses and efficiency of D.C. Machines.
  2. ii) 1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, O.C. and S.C. Tests, Losses and efficiency.

iii) Effect of voltage, frequency and waveform on losses. Parallel operation of 1 phase /3 phase transformers.
Autotransformers.

  1. iv) 3 phase induction motors, rotating magnetic field, the principle of operation, equivalent circuit, torque-speed characteristics, and starting and speed control of 3 phase induction motors.
  2. v) Methods of braking, effect of voltage and frequency variation on torque speed characteristics.

Fractional Kilowatt Motors and Single-Phase Induction Motors

  1. i) Characteristics and applications.
  2. ii) Synchronous Machines – Generation of 3-phase e.m.f. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power.

iii) Starting and applications of synchronous motors.

Generation, Transmission and Distribution

  1. i) Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults.
  2. ii) Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc. Buchholtz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars.

iii) Lightning arresters, various transmission and distribution system, comparison of conductor materials, the efficiency of different system.

  1. iv) Cable – Different type of cables, cable rating and derating factor.
  2. v) Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations.

Estimation and Costing

  1. i) Estimation of lighting scheme, electric installation of machines and relevant IE rules.
  2. ii) Earthing practices and IE Rules.

 

Utilization of Electrical Energy

  1. i) Illumination
  2. ii) Electric heating

iii) Electric welding

  1. iv) Electroplating
  2. v) Electric drives and motors.

Basic Electronics

  1. i) Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type) BJT and JFET.
  2. ii) Simple circuits using these devices.

SSC JE Syllabus 2021 For Paper 2: Mechanical Engineering

Theory Of Machines and Machine Designs

  1. i) Concept of a simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy
  2. ii) Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears –Type of gears etc.

Engineering Mechanics and Strength of Materials

  1. i) Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit.
  2. ii) Elastic constants, Bending moments and shear force diagram, Stress in composite bars etc.

Thermal Engineering

  1. i) Properties of Pure Substance1st & 2nd Law of Thermodynamics
  2. ii) Air standard Cycles for IC Engines.

iii) Rakine Cycle of steam Boilers

Fluid Mechanics Machinery

  1. i) Properties & Classification of fluid
  2. ii) Fluid Statics

iii) Measurement of Fluid Pressure

  1. iv) Fluid Kinematics
  2. v) Dynamics of Ideal Fluids
  3. vi) Measurement of Flow Rate Basic Principles

vii) Hydraulic Turbines

viii) Centrifugal Pumps

  1. ix) Classification of Steels

SSC JE Books

Name of the books Author/Publishers
SSC Junior Engineer Civil & Structural Recruitment Exam Guide 3rd Edition Disha Experts
SSC Junior Engineers (Mechanical) Exam Guide (Popular Master Guide) RPH Editorial Board
SSC JE Electrical Engineering for Junior Engineers Previous Year Solved Papers (2008-18), 2018-19 for Paper I GKP
SSC (CPWD/CWC/MES) General Intelligence & Reasoning General Awareness for Junior Engineers Guide GKP
General Knowledge Manohar Pandey

Books play an important role while preparing for a competitive exam. A few good SSC JE books for reference must be read during the preparation of SSC JE eamination:

In order to prepare for SSC JE exam, you need to be well prepared not only in your respective core engineering branches (i.e., Civil & Structural or Electrical or Mechanical) but also in subjects like General Intelligence and General Awareness.

Having a good knowledge of the exam pattern is very much needed to plan your study.

Also check >> SSC CHSL Syllabus 2021

UPSC Mains General Studies Paper-IV | FAQs Answered

UPSE Mains General Studies Paper-4 (GS-IV

UPSE Mains General Studies Paper-4 (GS-IV) is one of the nine papers of Mains Examination of the IAS examinations. It consists of the below major areas:

  1. Ethics
  2. Integrity
  3. Aptitude

These areas test the candidates’ attitude and approach to issues relating to integrity, probity in public life and his problem-solving approach to various issues and conflicts faced by him in dealing with society. This paper may also have a slight overlap of topics with Governance and Social Justice Subjects from UPSE Main General Studies-II but is largely independent of the syllabus of other GS papers.

GS 4 Structure

The following are the important features of the UPSC Mains General Studies Paper-IV – Structure/ General Studies IV paper:

  1. The paper consists of twelve questions with these divided into two sections. Before 2018, there were fourteen questions, though now the complexity has been increased and the number of questions has been reduced.
  2. All the questions are compulsory.
  3. The questions are of 10 marks and 20 marks depending on the length of the answer required. The 10 marks questions need answers within 150 words while the 20 marks questions need answers within 250 words.
  4. The total marks allotted to this paper are 250 marks.
  5. The questions are of two types:
    • Direct concept related questions which test the candidate’s understanding of ethical issues and concepts related to integrity and aptitude (125 marks)
    • Case studies which test the candidate’s application of those concepts to situations involving the candidate and other stakeholders such as politicians, pressure groups, the public and other people (125 marks)
  6. This paper is the most variable of the four General Studies Papers and the nature of questions differ widely from year to year. Candidates should familiarise themselves with the syllabus, and the last few year’s patterns as well.

UPSC Mains General Studies Paper-IV Ethics Syllabus:

Topic Detail
Ethics and Human Interface Aspirants should learn:

  • How you inculcate it
  • How you deal with society
  • How do you see whether the action is ethical or not?
  • What are the principles that you follow to ensure that the action is ethical or not?

Subtopics:

  • Dimensions of Ethics
  • Ethics in private and public relationships
  • Role of family, society and educational institutions in inculcating moral and ethical values
Human Values Aspirants should focus on:

  • How do people acquire values and majority of people acquire values when they read about the personality of importance like freedom fighters?
  • Consider a few books about 5-6 of great thinkers whom you admire, like or follow.

Subtopics

  • The Essence of Ethics, Determinants and Consequences of Ethics in Human Interaction
  • Human Values – lessons from the lives and teachings of great leaders, reformers and administrators

Note:

  • UPSC may give some statement of any great personalities and would ask to discuss it by applying it to the present context.
  • UPSC does not want thinkers’ point of view but what it looks for is how much the candidate has analysed, utilized and applied it to the current context.
Attitude Candidates should focus on Attitude:

  • Content, structure, function, its influence and relation with thought and behaviour for Part 2 of the question paper i.e., Case Study
  • The moral and political attitudes; social influence and persuasion would be for Part 1 of the Ethics Question Paper i.e., theory.

Subtopics

  • Content, structure and function of attitude
  • Influence of attitude in thought and behaviour
  • Relation of attitude to thought and behaviour
  • Moral and Political attitudes
  • Social influence and persuasion

Note: Question may be asked either in Part 1 or Part 2 i.e., either in theory or case study.

Aptitude Important list of words that a candidate should embed in their answer in order to enhance their answer and score high:

Integrity: not compromising on anything if someone offers your bribe will you compromise

Impartiality: Don’t show nepotism either for political parties or common man

Non-partisanship: no biases for different political parties

Objectivity: be neutral

Dedication to public service

Empathy

Tolerance

Compassion towards weaker section

Subtopics:

  • Aptitude and foundational values of Civil Service
  • Integrity
  • Impartiality and non-partisanship
  • Objectivity
  • Dedication to public service
  • Empathy, tolerance, and compassion towards the weaker sections of the society

Note: Candidates can refer to the ‘Ethics in Governance’ to cover this area as it gives a clear definition of the last five words or concepts including Nolan Committee Recommendations.

Emotional Intelligence Here as an administrator, one has to follow the three procedures of Emotional Intelligence and they are:

-Understand your emotions and control them

-Understand others emotion and control them

-Then, act according to solve the issue genuinely and effectively

Subtopics:

  • Concepts of emotional intelligence
  • Utility and application of emotional intelligence in administration and governance

Note: Questions may be asked in both Part 1 and Part 2

Ethical issues in international relations 
  • Candidates can take the example of Nepal Earthquake video how funding aided or any current similar such scenarios

Note: Questions may be asked Part 2 i.e., case study

Sharing and transparency in government, Right to information, codes of ethics, codes of conduct Candidates can refer to CCS, 1964 – The Central Civil Services (Conduct) Rules, 1964, which is of 300-400 pages

Subtopics:

  •  Status and associated problems
  • Ethical concerns and dilemmas in government and private institutions
  • Laws, rules, regulations and conscience as sources of ethical guidance
  • Accountability and ethical governance
  • Strengthening of ethical and moral values in governance
  • Ethical Issues in international relations and funding
  • Corporate governance
Citizen’s Charters, Work Culture, Quality of Service delivery, utilization of public funds, challenges of corruption
  • UPSC may ask direct questions on Citizen’s Charter
  • Candidates should be aware of how to frame a Citizen’s Charter and the rules and regulations that should be followed before framing a citizen charter
  • Questions in Case Study may also be expected

Subtopics:

  • Concept of public service
  • The philosophical basis of governance and probity
  • Information sharing and transparency in government
  • Right to Information
  • Codes of ethics
  • Codes of Conduct
  • Citizen’s Charters
  • Work culture
  • Quality of service delivery
  • Utilization of public funds
  • Challenges of corruption

 

The major takeaway from this exam is that it tests the candidate’s honesty and integrity along with their problem solving and conflict resolution skills.

This paper relies heavily on case studies which are the most scoring parts of the paper. The candidates should be able to analyse their own reactions to various situations and apply concepts dealt with in this paper on their actions and reactions to various situations while dealing with their social circle.

Also check >> SSC Syllabus 2021

UPSC Mains General Studies Paper-III Pdf 2021

UPSC Mains Paper-III

UPSC Mains General Studies Paper-III 2021 is one of the nine subjective papers of UPSC Mains. Trends of UPSC Main Examinations in the recent past make it clear that it has become very dynamic, and hence, the old traditional method of preparation does not suffice.

General Studies (GS) is multi-dimensional in nature as it deals with diverse subject matters that are constantly evolving to keep pace with the new developments. General Studies carries a total weightage of 1000 marks and can play a significant role in obtaining a good rank overall. Thus, it becomes highly imperative to master the GS answer writing skills.

This year, the IAS Prelims 2021 will be conducted on June 27, 2021 and IAS Mains will be conducted on September 17-22, 2021.

This table demonstrates the pattern of the exam of the different stages you have to attempt:

Prelims General studies Aptitude test
Mains Qualifying in nature

  • Paper A- compulsory Indian language- 22 languages
  • Paper B- English
  • To qualify, minimum 25% is necessary

Merit-based paper

  • Paper-I (Essay)
  • Paper-II (GS-I)
  • Paper-III (GS-II)
  • Paper-IV (GS-III)
  • Paper-V (GS-IV)
  • Paper-VI (Optional Paper-I)
  • Paper-VI (Optional Paper-II)

General Studies Paper 3 is divided into:

  1. Science & Technology
  2. Economic Development
  3. Biodiversity & Environment
  4. Security & Challenges
  5. Disaster Management.

Aspirants who wish to download the UPSC Mains General Studies Paper-III pdf can visit the official website of the government or can refer the content provided on our website.

 

UPSC IAS Mains 2020: Structure of General Studies Paper-III

  1. The pattern of Mains General Studies Paper-III will consist of 20 questions that need to be attempted in a time frame of 3 hours.
  2. The paper is of a total of 250 marks with questions of 10- and 15-marks weightage
  3. The word limit for 10 marks questions is 150 and 15 marks are 250

UPSC Mains General Studies Paper-III 2021 Syllabus is given in the detailed manner in table below:

Focus Areas in GS Paper-III
Subject Topics
Economics Economic Development in India

  • Current Affairs
  • Select articles from ‘The Hindu’
  • Class 12 NCERT – ‘Introductory Macroeconomics’
  • Economic Survey of India and India Year Book
  • Macroeconomics
  • Indian Economy

Issues related to planning

Mobilization of resources

Growth

Development

Employment

· Government Budgeting

  • Land reforms in India
  • Infrastructure

Energy

Ports

Roads

Airports

Railways

Science & Technology
  • Dark Matter
  • Higgs Boson
  • Rare Earth Elements
  • GM Crops
  • Gene Editing
  • Artificial Intelligence
  • Space Technology
  • Defence Technology
  • Important contributions of Indians in Science and Technology
  • Indigenization of technology
  • Developing new technology indigenously
  • Developments in Science and Technology
  • Applications of scientific developments in everyday life
  • Effects of scientific developments in everyday life
Biodiversity
  • Types of Biodiversity
  • Biodiversity and Environment

Conservation

Environmental pollution and degradation

Environmental Impact Assessment

  • Current Affairs Awareness in the following fields:
    • IT
    • Space
    • Computers
    • Robotics
    • Nanotechnology
    • Biotechnology

Issues related to Intellectual Property

Rights in these fields

  • ‘Textbook of Environmental Studies for Undergraduate Courses’ by Erach Bharucha
  • Ministry of Environment, Forests and Climate Change (MoEFCC) Official Website
  • Yojana (January 2020) – Click the link to get the gist of Yojana
Security
  • Terrorism
  • Linkages between development and spread of extremism
  • Role of state and non-state actors in creating challenges to internal security
  • Challenges to Internal Security through communication networks:
    • Role of media and social networking sites in internal security challenges
  • Basics of Cyber Security
  • Money laundering and its prevention
  • Security challenges and their management in border areas:
    • Linkages of organized crime with terrorism
    • Various Sec
Disaster Management
  • Disaster Management in India
  • PM Cares Fund
  • National Disaster Management Plan 2016
  • Yojana (January 2017) edition- this covers Disaster Management perspectives.

Students can download previous years question paper from: https://www.upsc.gov.in/examinations/previous-question-papers

Recommended Books for UPSC Mains General Studies Paper-III 2021 for IAS Mains Exam:

  1. NCERT Class X – Understanding Economic Development
  2. NCERT Class XI – Indian Economic Development
  3. NCERT Class XII – Macroeconomics (chapters 2,5 and 6 are very important)
  4. Indian Economy for Civil Services Examinations – Ramesh Singh
  5. Challenges to Internal Security of India by Ashok Kumar and Vipul
  6. IGNOU Notes on Disaster Management.
  7. IGNOU Notes on Cyber Security.
  8. India Year Book
  9. NITI Aayog Reports

10.Lok Sabha Question-Answers

Check out >> UPSC Mains General Studies Paper-IV Syllabus

UPSC Mains General Studies Paper-II 2021 Pdf

UPSC Mains General Studies Paper-II

UPSC Mains General Studies Paper-II (the second stage of the selection process) has 9 examinations in total followed by a personality test in the end.

The tentative date is September 17-22, 2021 and the Prelims will be conducted on June 27, 2021. General Studies Paper-II is a mandatory paper for appearing candidates. This paper is completely based on Polity, Governance, and International Relations which makes it a scoring paper.

UPSC Mains General Studies Paper II: Topic-wise division

The first step of preparing UPSC Mains General Studies Paper-II is dividing it into 4 sections. When students go through previous years’ question papers and sample questions, can get a significant idea about the expected number of questions that comes from each section of this paper:

Sections No. of Questions (10 marks) No. of Questions

(15 marks)

Indian Polity and Constitution 4 – 5 3-4
Governance 0 -2 1 – 3
International Relations Section 2 – 3 2- 3
Social Justice 1 – 2 1 – 2

There were 20 questions. 10 questions were of 10 marks each, while the remaining 10 questions were of 15 marks each.

UPSC Mains General Studies Paper II 2021- Instructions

  • Total Marks: 250 marks, Time duration: 3 hours.
  • There are 20 questions printed both in ENGLISH and HINDI.
  • All questions are compulsory.
  • Answers must be written in the medium authorized in the admission certificate which must be stated clearly on the cover of this question-cum-answer (QCA) booklet in the space provided.
  • No marks will be given for answers written in the medium other than the authorized one.
  • Answers to questions no. 1 to 10 should be in 150 words, whereas answers to questions no. 11 to 20 should be in 250 words.
  • Keep the word limit indicated in the questions in mind.
Focus Areas in UPSC Mains GS Paper-II
Subject Topics
Polity 1. Indian Constitution

  • Historical underpinnings of the constitution
  • Evolution of the Constitution
  • Salient features
  • Basic structure
  • Amendments
  • Significant provisions
  • Functions and responsibilities of the Union and the states
  • Issues and challenges related to the Federal Structure
  • Devolution of powers and finances up to local government level
  • Challenges in the devolution of power
  • Separation of powers between various organs of the government
  • Dispute redressal mechanisms and institutions
  • Comparison of India’s constitutional scheme with other countries

2. Features of Indian Constitution

  • Amendments in Indian Constitution
  • Provisions
  • Constitutional and non-constitutional bodies

Books that you can refer:

  • ‘Indian Polity’ by Laxmikanth (Do read this book at least three times)
  • Class 11 NCERT – ‘Indian Constitution at Work’
Governance
  • Parliament and State Legislatures
    • Structure
    • Functioning
    • Conduct of Business
    • Powers & Privileges
    • Issues arising out of Powers & Privileges of legislative bodies
  • Executive and Judiciary
    • Structure
    • Organization
    • Functioning
    • Ministries and departments of the government
  • Pressure groups
  • Formal & Informal associations and their role in the polity
  • Salient features of the People’s Representation Act
  • Appointment to various constitutional posts
  • Powers, functions and responsibilities of various constitutional bodies
  • Statutory, regulatory and various quasi-judicial bodies
  • Government policies and interventions for the development of various sectors
  • Issues arising out of design and implementation of government intervention
  • Development processes and the development of industry
  • The role of NGOs, SHGs, various groups and associations, donors, charities, institutional and other stakeholders
  • Important aspects of governance, transparency and accountability
  • e-governance
    • applications
    • models
    • successes
    • limitations and potential
    • citizens charters
    • transparency & accountability and institutional and other measures.
  • Role of Civil Services in a Democracy

Daily reading of newspaper to be complemented with:

  • Select articles from ‘The Hindu’
  • Economic Survey
  • Press Information Bureau (PIB)
  • ARC reports
Social Justice
  • Issues relating to poverty and hunger
  • Welfare schemes for vulnerable sections of the population by centre and states
  • The performance of welfare schemes
  • Mechanisms, laws, institutions and Bodies constituted for the protection and betterment of vulnerable sections of the population
  • Issues related to the development and management of the social sector/Services relating to Health, Education, Human Resources
  • Issues related to poverty and hunger
International Relations
  • Bilateral Groupings
  • India and its neighbourhood
  • Relations between India and neighbouring countries
  • Bilateral, regional and global groupings and agreements involving India and/or affecting India’s Interests
  • Effect of policies and politics of developed and developing countries on India’s interests
  • Indian diaspora
  • Important International institutions, agencies and fora
    • Structure
    • Mandate

 

Overview of UPSC Mains General Studies Paper-II 2021 Syllabus:

There is a high degree of overlap between subjects which should be kept in mind while preparing the UPSC Mains General Studies Paper-II 2021. A thorough analysis of current affairs (national and international) related to UPSC GS 2 as well as a good understanding of the constitution and its structure along with the structure of the government should be a major focus part of preparation. UPSC aspirants can also refer to UPSC Mains General Studies Paper-II pdf to better understand the exam structure on the official website of the government.

Check out >> UPSC Mains General Studies Paper-III Syllabus 2021